Product Description

UScreen™ 10-Panel Drug Test Dip Card | CLIA Waived, FDA OTC Approved | 25/Box

Fast, accurate screening with clear lines and easy procedure • Ships from the USA • Units/Box: 25

Item # USSDIP-10P

CLIA Waived FDA 510(k) Cleared OTC Approved* Results in 90–5 min

The UScreen™ 10-Panel Rapid Drug Test Dip Card is engineered for fast and reliable results. Negative results are available in as little as 90 seconds with dark, easy-to-read lines, while presumptive positive results can be confirmed within 5 minutes.

As an FDA OTC-cleared device, this dip card may be purchased without a prescription and used both in workplace testing programs and at-home screenings. Each test complies with FDA standards for safety, labeling, and accuracy.

Key Features

• Fast negatives: clear control/test lines typically within 90 seconds.
• Readable positives: presumptive positives at 5 minutes (do not read after 10 minutes).
• Flood-resistant design: minimizes over-immersion errors.
• Long shelf life: up to 36 months from date of manufacture.
• CLIA Waived & FDA 510(k): supports professional and OTC screening workflows.*
• Packaged in cases of 25 individually sealed dip cards
• Accurate, dependable, and easy-to-use format
• Dark test and control lines ensure clear readability
• Wholesale and bulk pricing available every day

What’s Included

• 25 × UScreen® 10-Panel Dip Cards (individually pouched)
• Package insert (IFU) with step-by-step instructions

Simple Test Procedure

1. Bring the test to room temperature (15–30°C).
2. Remove cap and immerse the strip tips into the urine sample for 10–15 seconds.
3. Recap and lay flat; read negatives at 90 seconds and positives at 5 minutes.

Cutoffs and detection windows are typical for 10-panel configurations; confirm exact panels and values against the product insert for your lot.

Storage & Compliance

• Store at 2–30 °C (36–86 °F). Do not freeze. Keep sealed until use.
• For screening only; confirm positives by GC/MS or LC/MS/MS per policy.
• *OTC availability varies by model/market—verify label claims on your box/IFU.

How to Use the UScreen® 10-Panel Dip Card

1. Perform the test at room temperature (59°F – 86°F / 15°C – 30°C).
2. Remove the dip card from its sealed foil pouch and use within 1 hour.
3. Hold the device firmly, uncap to expose the absorbent end, and immerse in urine for about 10 seconds.
4. Re-cap the device and place it flat on a clean, dry surface.
5. Start the timer immediately:
   • Adulteration strips (if included): read within 30–45 seconds and compare with the color chart. If tampering is detected, do not interpret drug results.
   • Drug test results: read at 5 minutes. Do not interpret results after 10 minutes.

Interpreting Results

• Negative: Line present in both the test and control regions.
• Presumptive Positive: No line in the test region with a control line present.
• Note: Even faint lines should be interpreted as negative.

UScreen™ Dip Card Downloads

  Download UScreen® Multi-Panel Dip Card Instructions (IFU)