DrugCheck® NxStep Onsite Urinalysis Test Cup This easy to use cup serves as an instant screening device and as a sample collection cup for confirmatory testing. The self-contained urinalysis screening cup detects the presence of drug metabolites in minutes, using SAMHSA cutoff levels. The NxStep cup is FDA cleared and each cup can screen from a single drug to 14 drugs and features optional adulterant detection.
- Unbreakable cup surface
- FDA 510(k) Approved
- CLIA Waived
- Health Canada Approved
- Accuracy up 99%
- Results in 5 minutes
- Shelf life up to 18 months
- For home or office use
- This drug test is a clinical grade test designed for professional drug testing
- FDA 510(K) cleared
- Tamper proof strip insert
- Made in the USA
- Custom Panels Available
Order qualifies for free ground shipping!
|Drug Test Panels Included on this Device|
|Item Number||Panel Configuration||Approvals|
|60600||AMP, BZO, COC, MET, OPI-2000||FDA 510(k), CLIA Waived, Health Canada|
|FDA 510(k) & SAMSHA Approved CLIA Waived Drug Panels|
|Drug Name||Abbreviation||Cutoff Level||Minimum Detection Time in Urine*||Maximum Detection Time in Urine*||Calibrator|
|Amphetamines||AMP||1000 ng/ml||2-7 hours||2-4 days||D-Amphetamine|
|Amphetamines||AMP||500 ng/ml||2-7 hours||2-4 days||D-Amphetamine|
|Barbiturates||BAR||300 ng/ml||2-4 hours||1-3 weeks||Secobarbital|
|Benzodiazepines||BZO / BZD||300 ng/ml||2-7 hours||1-4 days||Benzoylecgonine|
|Buprenorphine||BUP||10 ng/ml||2-3 hours||1 day||Buprenorphine|
|Cocaine||COC||300 ng/ml||1-4 hours||2-4 days||Benzoylecgonine|
|Cocaine||COC||150 ng/mL||1-4 Hours||2-4 Days||Benzoylecgonine|
|Ecstasy||MDMA||500 ng/ml||1-3 days||1-2 days||D,L- Methylenedioxy-methamphetamine|
|EDDP||EDDP||300 ng/ml||1-4 hours||2-4 days||2-Ethylidene-1,5-dimethyl-3,3-dipheylpyrrolidine|
|Marijuana||THC||50 ng/ml||2 hours||up to 40 days||11-nor-∆9-THC-9 COOH|
|Methadone||MTD / MAD||300 ng/ml||3-8 hours||1-3 days||Methadone|
|Methamphetamine||mAMP / MET||1000 ng/ml||2-7 hours||2-4 days||D-Methamphetamine|
|Methamphetamine||mAMP / MET||500 ng/ml||2-7 hours||2-4 days||D-Methamphetamine|
|Morphine||MOP / OPI-300||300 ng/ml||2 hours||2-3 days||Morphine|
|Opiates||OPI||2000 ng/ml||2 hours||2-3 days||Morphine|
|Oxycodone||OXY||100 ng/ml||1-3 hours||1-2 days||Oxycodone|
|Phencyclidine||PCP||25 ng/ml||4-6 hours||7-14 days||Phencyclidine|
|Propoxyphene||PPX||300 ng/ml||1-2 days||N/A||Propoxyphene|
|Tricyclic Antidepressants||TCA||1000 ng/ml||8-12 hours||2-7 days||Nortriptyline|
|* Detection times are not guaranteed. Reference configuration above for included drug panels. This assay provides only a preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas Chromatography/Mass Spectrometry (GC/MS) is the preferred confirmatory method. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are indicated.|
|INSTRUCTIONS FOR USE|
|PERFORMING THE TEST|
Remove the test device from the sealed pouch. Write the donor name or ID on the dip card in the provided space, then remove the cap.
With the arrows pointing toward the urine specimen, immerse the sample tips vertically in the urine specimen for at least 20 seconds. Replace the cap back onto the dip card and place the dip card on a flat surface.
Read drug test results at 5 minutes. Results remain stable for 60 minutes.
Read urine adulteration test results by visually comparing the color of the reagent pads to the corresponding color blocks on the Color Chart at 3 to 5 minutes.
|INTERPRETATION OF RESULTS|
NEGATIVE: Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T). Certain lines may appear lighter or thinner than other lines. A line is to be considered a line whether it is faint, light or dark. If a colored line appears next to both the Control Region and Test Region (as shown to the right), the result is NEGATIVE. A negative result means the drug, or drugs, in question were not detected. The color intensity (faintness or darkness) of the line is not a factor when assessing results. A faint line DOES NOT mean the specimen contains small amounts of a specific drug metabolite.
Preliminary Positive Result:
POSITIVE: Only one colored band appears, in the control region (C). When no line appears in the Test Region (T) but a colored line is displayed in the Control Region (C), the drug test result is POSITIVE. A positive urine test result indicates that the drug, or drugs, in question were detected by the drug test. The positive drug test result might be the start of action against an employee, parolee, student, etc. who abuses illicit substances.
Before a positive result can be ascertained, check to be sure the Control Region (C) is marked with a colored line to indicate the test is valid and non-defective. If there is no colored line marking the Control Region (C), the test is not valid, and the test result may not be accurate.
NOTE: Instant immunoassays are only used for preliminary screening. If a preliminary screening test is positive, the positive test results obtained through instant drug tests should be sent to a SAMHSA-Certified laboratory site for confirmation.
INVALID: Control band fails to appear. Results from any test which has not produced a control band at the specific read time must be discarded. Please review the procedure and repeat with a new test. If the problem persists, discontinue using the kit immediately and contact your local distributor.
How to Read a Temperature Strip on a Drug Test:
When obtained fresh, human urine is typically at 94-96°F. However, the temperature may change as soon as it is exposed to either warm or cool environment. For drug screening, a urine temperature that is within the range of 90-100°F is usually acceptable. Ensuring that the sample is in this temperature range is the best way to tell whether the sample actually came from the donor at the time of testing. If the specimen temperatures go lower or higher than this range, the urine test was likely tampered with or contaminated. If this is the case, the sample will be rejected and the donor may be subject to consequences and another drug test.
A urine test cup usually contains a temperature strip, which is built in to detect abnormalities in the specimen. Temperature strips for urine testing can also be applied separately by a Third Party Collector (TPA).
An acceptable urine temperature for drug test analysis falls between the range of 32–38 °C (90–100 °F). If the drug test temperature is out of range, it is possible the urine is adulterated by substances (i.e. water) indicating the drug test has been falsified. Again, a TPA will have the greatest understanding of drug test results.
Preventing Urine Sample Adulteration
To prevent sample adulteration it is important ot maintain tight control on the collection process. Tight control of the collection process can help protect against adulteration and prevent individuals from falsifying their drug tests. Other ways to prevent falsified urine samples: